Aztek V6-3.4L VIN E (2001)
7. Remove the timing chain dampener bolts.
8. Remove the timing chain dampener.
9. Clean and inspect the timing chain and gears.
Installation Procedure
1. Install the crankshaft sprocket using the J 38612.
2. Apply prelube GM P/N 1052365 or the equivalent to the crankshaft sprocket thrust surface.
3. Install the timing chain dampener.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the timing chain dampener bolts.
^
Tighten the timing chain dampener bolt to 21 Nm (15 ft. lbs.).