Aztek V6-3.4L VIN E (2001)
6. Loosen the forward blower resistor assembly mounting screws.
7. Remove the rearward blower resistor assembly mounting screw.
8. Remove the blower motor resistor assembly from the HVAC module assembly.
INSTALLATION PROCEDURE
1. Install the blower motor resistor assembly to the HVAC module assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rearward blower resistor assembly mounting screw.
Tighten
Tighten all of the screws to 1.8 N.m (16 lb in).