Aztek V6-3.4L VIN E (2001)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the wiper motor module assembly.
3. Disconnect the vacuum hose from the brake booster and reposition.
4. Remove the air cleaner cover and intake duct.
IMPORTANT: Disconnect the throttle and cruise control cables from the TBI mounting bracket to prevent bending the cable housings.
5. Disconnect the throttle and cruise control cables.
6. Remove the transmission fluid filler tube.
7. Disconnect both heater hose quick disconnects from the inlet and outlet pipes.
8. Disconnect the outlet heater hose (3) from the outlet heater pipe (4).
9. Disconnect the outlet heater hose clamp using the J 38185.
10. Disconnect the outlet heater hose from the heater core.
11. Remove the outlet heater hose.
INSTALLATION PROCEDURE
