pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Disabling|Page 11534 > < Diagram Information and Instructions|Page 11528
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition switch.
4. Remove the console accessory wiring junction block access hole cover.

IMPORTANT:  With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the SIR Fuse.

6. Remove the LH insulator panel.
7. Remove the Connector Position Assurance (CPA) from the inflatable restraint steering wheel module coil connector (1) located at the base of the

steering column.

8. Disconnect the steering wheel module coil connector (1).

Disabling|Page 11534 > < Diagram Information and Instructions|Page 11528