Aztek V6-3.4L VIN E (2001)
1. Lightly oil the replacement oil filter gasket with clean oil and install the new oil filter.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the new oil filter.
^
Tighten the new oil filter to 3/4 to 1 full turn, after the oil filter gasket contacts the oil filter mounting surface.
3. Install the engine oil drain plug.
^
Tighten the engine oil drain plug to 25 Nm (18 ft. lbs.).
4. Remove the oil drain pan.
5. Lower the vehicle.
6. Fill the engine with new engine oil.