Aztek V6-3.4L VIN E (2001)
4. Carefully slide the new O-ring seal onto the A/C refrigerant line.
5. The O-ring seal must be fully seated.
6. Connect the A/C line.
^
For compression style fittings use a back up wrench on the fitting (2) and tighten the fitting nut (1) to specification.
^
For banjo style fittings install the bolt retaining the banjo type fitting and tighten to specification.
7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
8. Leak test the fittings of the component using J39400-A.
