Aztek V6-3.4L VIN E (2001)
Power Steering Line/Hose: Service and Repair
P/S Pressure Hose Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the right side engine splash shield.
3. Remove the power steering gear heat shield.
4. Place the drain pan under the power steering pump and the power steering gear.
5. For front wheel drive vehicles, remove the pipe retainer.
6. For all wheel drive vehicles, remove the pipe rear clip bolt.
7. Remove the pressure hose from the steering gear.
8. Remove the pressure hose from the hose retainer.
9. Position the pressure hose lower portion into the right wheel opening.
10. Lower the vehicle.
11. Remove the drive belt.