Aztek V6-3.4L VIN E (2001)
Refer to Instrument Panel Cluster (IPC) Description and Operation and Indicator/Warning Message Description and Operation in Instrument Panel,
Gages, and Warning Indicators for more information.
Interior Lighting
The BCM provides the following interior lighting functions. Some interior control functions may be controlled by other Systems through the class 2
serial data link:
^
Interior illumination control
^
Backlight/Illumination
^
Delayed illumination
^
Illumination on key cylinder unlock
^
Exit illumination
^
Illumination after air bag deployment
^
Keyless entry unlock illumination
^
Interior lighting personalization
Refer to Interior Lighting Systems Description and Operation in Lighting and Horns for more information.
Keyless Entry
The BCM provides the following keyless entry control functions. Some keyless entry control functions may be controlled and/or sent by other systems
through the class 2 serial data link:
^
Remote driver door unlock
^
Remote all door unlock
^
Remote all door lock
^
Remote activation verification
^
Remote alarm
^
Keyless entry personalization
Refer to Keyless Entry System Description and Operation in Keyless Entry for more information.
Content Theft Deterrent
The BCM provides the following content theft deterrent control functions. Some content theft deterrent control functions may be controlled and/or sent
by other systems through the class 2 serial data link:
^
Intrusion detection
-
Status of the doors and rear endgate
-
Lock cylinders
-
Rear liftglass
-
Power door locks
-
The keyless entry system
^
Intrusion notification
-
Security indicator LED
-
Flashes the headlamps
-
Sounds the horns
-
Disables fuel delivery to the engine
^
Content theft deterrent personalization
Refer to Theft Systems Description and Operation in Antitheft and Alarm Systems for more information.
BCM Functions
The Body Control Module (BCM) is capable of accomplishing multiple body control functions. Components directly connected to the BCM are
controlled by the BCM outputs. The BCM can control its outputs based on input information it obtains from sensors and switches that are directly
connected to the BCM, or by receiving information from other vehicle systems connected to the class 2 serial data link. The BCM evaluates this
information and controls certain body systems by commanding an output on or off.
The BCM is also capable of commanding other vehicle systems to control functions that are not directly wired to and/or controlled by the BCM. The
BCM accomplishes this task by sending specific messages on the class 2 serial data link. The vehicle system capable of performing such function will
respond to the BCM message.
The BCM controls/monitors the following functions:
^
Audible warnings
^
Indicators control
^
Interior lighting
^
Exterior lighting
^
Power/automatic door locks
^
Keyless entry
^
Content theft deterrent
^
Personalization
^
Serial Power Modes
