Aztek V6-3.4L VIN E (2001)
Intrusion Sensor: The Scan Tool displays Driver Id Intrusion On/Driver Id Intrusion Off/Switched Intrusion On/Switched Intrusion Off. Display
indicates current sensor status.
Key Cylinder Lock Switch: The Scan Tool displays Active/Inactive. Active indicates that the Key Cylinder is in the lock position.
Key Cylinder Unlock: The Scan Tool displays Active/Inactive. Active indicates that the Key Cylinder is in the unlock position.
Key In Ignition: The Scan Tool displays Active/Inactive. The Scan Tool displays Active when the ignition key is inserted into the ignition switch.
LH Lift Glass Ajar Switch: The Scan Tool displays Active/Inactive. Active indicates that the lift glass is open.
Liftgate Ajar Switch: The Scan Tool displays Active/Inactive. Active indicates that the liftgate is open.
Liftgate Key Cyl. Unlk. Sw.: The Scan Tool displays Active/Inactive. Active indicates that the Liftgate Key Cylinder is in the unlock position.
Liftgate Open Switch: The Scan Tool displays Active/Inactive. Active indicates that the liftgate is open.
Liftgate Sensor: The Scan Tool displays Alarm Disarmed/Disabled/Active/Inactive/Armed. Display indicates current sensor status.
Load Shed: The Scan Tool displays None/Level 1/Level 2/Level 3. The Scan Tool displays None when Load Shed does not require conservation of
electrical power.
Lock/Unlock Switch: The Scan Tool displays 0.0 - 25.5 volts. The voltage level is determined by the switch function being selected.
Park Brake Switch: The Scan Tool displays Active/Inactive. The Scan Tool displays Active when the parking brake has been pressed.
Park Lamp Monitor: The Scan Tool displays Active/Inactive. Monitors the Park Lamp output of the control module.
Park/Neutral Switch: The Scan Tool displays Active/Inactive. The Scan Tool displays Active when the operator places the vehicle in Park or Neutral.
Parklamp Switch: The Scan Tool displays Active/Inactive. The Scan Tool displays Active when the operator has requested park lamp operation.
Passenger Door Open Sw: The Scan Tool displays Open/Closed indicating the position of the passenger door.
Passenger Door Sensor: The Scan Tool displays Alarm Disarmed/Disabled/Active/Inactive/Armed. Display indicates current sensor status.
Power Mode Sensor: The Scan Tool displays Alarm Disarmed/Disabled/Active/Inactive/Armed. Display indicates current sensor status.
Rear Door Open Switch: The Scan Tool displays Active/Inactive. Active indicates that one or both of the rear doors are opened.
Rear Door Sensor: The Scan Tool displays Alarm Disarmed/Disabled/Active/Inactive/Armed. Display indicates current sensor status.
Rear Release Switch: The Scan Tool displays Active/Inactive. The Scan Tool displays Active when the operator has requested lift glass release.
RFA Serial Data Link: The Scan Tool displays Active/Inactive. The Scan Tool displays Active when serial data is present.
RH Lift Glass Ajar Switch: The Scan Tool displays Active/Inactive. Active indicates that the lift glass is open.
Rt. and Left Glass Sen.: The Scan Tool displays Alarm Disarmed/Disabled/Active/Inactive/Armed. Display indicates current sensor status.
Security LED: The Scan Tool displays On/Off. Displays the status of the Security LED.
Service Alarm Sensor: The Scan Tool displays Alarm Disarmed/Disabled/Active/Inactive/Armed. Display indicates current sensor status.
Shock Sensor: The Scan Tool displays On/Off. Display indicates current sensor status.
TCS Switch State: The Scan Tool displays Active/Inactive. Displays the state of the Traction Control Switch.
Theft Tamper Switch: The Scan Tool displays Active/Inactive indicating the status of the Theft Tamper Switch.