Aztek V6-3.4L VIN E (2001)
Compressor/Pump: Service and Repair
Automatic Level Control Air Compressor Head Replacement
Removal Procedure
1. Remove the automatic level control air compressor from the vehicle.
2. Remove the air dryer from the automatic level control air compressor.
3. Remove the wiring terminals B and D from the automatic level control air compressor electrical connector.
4. Disconnect the exhaust hose from the automatic level control air compressor head.
5. Remove the bolts/screws from the automatic level control air compressor head (2).
6. Remove the automatic level control air compressor head.
7. Remove the O-ring (3) from the automatic level control air compressor.
Installation Procedure
1. Install the O-ring (3) to the automatic level control air compressor.
2. Install the air compressor head.