Aztek AWD V6-3.4L VIN E (2004)
8. Install the park brake cable to the park brake equalizer.
9. Install the park brake cable end to the park brake cable connector.
10. Install the park brake left side cable to the park brake equalizer.
11. Adjust the park brake cable.
12. Lower the vehicle.
13. Fold the carpet back in place.
14. Install the left-side door sill plate.
15. Install the left-side instrument panel insulator.
Disc
Park Brake Cable Replacement - Left Rear (Disc)
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
1. Release the park brake.
2. Raise and support the vehicle.
3. Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from the park brake equalizer.