Aztek AWD V6-3.4L VIN E (2004)
12. Remove the evaporator outlet tube bracket bolt.
13. Remove the suction hose to evaporator outlet tube fitting bolt.
14. Disconnect the evaporator outlet tube from the suction hose.
15. Cap or tape off the suction hose.
16. Remove the evaporator outlet tube.
17. Remove and discard the sealing washers.
INSTALLATION PROCEDURE
1. Install new sealing washers to the evaporator outlet tube.
2. Install the evaporator outlet tube.
3. Remove the cap or tape from the suction hose.
4. Connect the evaporator outlet tube to the suction hose.
NOTE: Refer to Fastener Notice in Service Precautions.