Aztek FWD V6-3.4L VIN E (2005)
1. Install the right rear air tube on the vehicle in the routing clips.
2. Connect the right rear air tube to the tee connector.
3. Connect the right rear air tube to the right rear shock absorber.
4. Connect the left rear air tube to the tee connector.
5. Connect the left rear air tube to the right rear shock absorber.
6. Important:
Before driving the vehicle, turn the ignition on and wait approximately 45 seconds. This will ensure that the air adjustable shock absorbers are
filled with residual pressure.
Lower the vehicle.
