Bonneville V6-231 3.8L VIN 3 SFI (1988)
Testing Of SI Series Alternators - Part 2 Of 3
Disassembly
NOTE: Refer to figures for views.
1. Make scribe marks on end frames to facilitate reassembly.
2. Remove thru bolts and separate end frames.
3. Remove three attaching nuts and regulator attaching screws.
4. Separate stator, diode trio and regulator from end frame.
5. Put brushes in holder and retain in place with brush retaining wire.
Reassembly:
1. Place assembled brush holder in end frame with retaining wire protruding through the end frame.
2. Reverse the procedure, installing the regulator, diode trio, and stator.
3. Reassemble the two end frames with the attaching bolts.
4. With the alternator completely assembled, remove the brush retaining wire from the back of the alternator.
