Bonneville V6-231 3.8L VIN 3 SFI (1988)
FIGURE 7 - VALVE BODY RING INSTALLATION
C.
Install new split rings onto the valve assembly as follows:
Important
Valve assemblies and housings are NOT interchangeable. The same valve assembly MUST be reinstalled or rack and pinion assembly must be
replaced.
Important
Apply a liberal quantity of grease supplied in kit, in each ring groove and to new valve body rings when installed to hold rings in position. (See
Figure 7.)
1.
Install new valve body rings to pinion and valve assembly. (Care must be taken not to cut rings at installation.)
