Bonneville V6-231 3.8L VIN 3 SFI (1988)
Figure 2 - Input Clutch Housing And Shaft Assembly
DATE OF PRODUCTION CHANGE:
(Figure 1)
July 29, 1986 (Julian Date 210) all 1987 THM 440-T4 transaxles were built using a new design input housing and shaft assembly (626). Refer to Figure
2 for the specific changes.
Figure 3 - J 37361 And J 37362 Seal Installers
SERVICE ACTION:
When servicing the input clutch housing and shaft assembly on a 1985- 1988 THM 440-T4 transaxle use the new seal installation tools, J 37361 and J
37362 (Figure 3). The previous design tools, J 34091 and J 34092 will work on 1985-1986 transaxles only.
