pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Solar Sensor, HVAC > < A/C High Pressure Cut-Out Switch|Page 789
Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair

A/C System Switch Locations

TIP: The pressure cycling switch is mounted on a Schrader-type valve. It is not necessary to recover the refrigerant from the A/C system to replace this
switch.

REMOVE OR DISCONNECT

1. Electrical connection from switch.

2. Switch and O-ring seal. 

INSTALL OR CONNECT

1. Switch and new O-ring seal.

2. Tighten Switch to 5 Nm (44 lb. in.).

3. Electrical connection to switch.

Solar Sensor, HVAC > < A/C High Pressure Cut-Out Switch|Page 789