Bonneville V6-3.8L SC VIN 1 (1995)
Steering Gear: Service and Repair
Power Steering Gear
Tool Required:
J 24319-01 Puller
Remove or Disconnect
1. Raise vehicle with suspension contact hoist and suitably support.
2. Both front tires and wheels.
CAUTION: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear
and/or intermediate shaft. This damage can cause loss of steering control which could result in personal injury.
NOTICE: The wheels of the vehicle must be straight ahead and the steering column in the "LOCK" position before disconnecting the steering
column or intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly in the steering column to become uncentered
which will cause damage to the coil assembly.
3. Intermediate shaft lower connection.
4. Using J 24319-01, tie rod ends from steering knuckles.
Power Steering Hose Routing
