Bonneville V6-3.8L SC VIN 1 (1995)
6.
In order to compress the spring in the strut assembly, install the strut (see Figure 1, Item 1) into the Strut Compressor Tool, J 34013-B.
^
Tighten the nuts (see Figure 1, Item 2) flush with the Strut Compressor Tool.
^
Install the locking pins (see Figure 1, Item 4) through the strut.
^
Mark the orientation of the spring relative to the strut.
^
Turn the Strut Compressor Tool Forcing Screw (see Figure 1, Item 3) until spring compresses enough so that the upper spring seat can be
rotated.
^
Refer to Figure 3 for front strut assembly component identification.
7.
For "lead or pull" conditions to the right:
^
Rotate upper spring seat clockwise 20 to 25 degrees, or about 2.5 cm (1 in.).
