pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Automatic A/C System (C68 & CJ2)|Page 8446 > < Manual A/C (RPO C61)|Page 8443
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Automatic A/C System (C68 & CJ2)

AIR MIX VALVE ACTUATOR FOR ELECTRONIC A/C (C68)

Remove or Disconnect

-Disable SIR system. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air Bag(s) Arming and Disarming

1. I/P assembly.

2. Temperature valve link rod.

3. Electrical connector.

4. Air mix actuator screws and actuator.

-Adjust temperature valve link rod after installation, refer to "Temperature Valve Link Adjustment" See: Adjustments

Install or Connect

1. Air mix valve actuator and mounting screws.

2. Tighten screws to 1.4 Nm (12 lb.in.).

3. Electrical connector.

4. Temperature valve link rod.

5. I/P assembly.

-Enable SIR system. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air Bag(s) Arming and Disarming

Automatic A/C System (C68 & CJ2)|Page 8446 > < Manual A/C (RPO C61)|Page 8443