Bonneville V6-3800 3.8L (1991)
9.
Loosen the bolts to the interlock and solenoid assembly through the steering column lower support bracket.
10.
Move the interlock and solenoid assembly towards the steering column approximately 2 mm (1/8 inch).
11.
Tighten the bolts for the interlock and solenoid assembly evenly to 16.0 N.m (12 lbs.ft.).
Check the BTSI system for proper operation. If condition still exists, repeat steps 8 through 11.
If the condition still exists after several attempts to adjust the BTSI system, it may be necessary to remove the steering column from the vehicle to adjust
the BTSI system on a bench. Refer to service manual section 3F4, Steering Column Unit Repair.