Bonneville V6-3800 3.8L (1991)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Rings
Front
On models equipped with tri-pot joints on inboard axles, care must be taken not to overextend joints. When either or both ends are disconnected,
overextending the tri-pot joint could result in internal joint separation.
On vehicles equipped with ball type constant velocity inboard joints, install inner drive joint seal protector J-34754, on inboard seal and install
axle boot protector J-28712 on outboard seal if necessary. On vehicles equipped with tri-pot inboard joints, install axle boot seal protector J-28712 on
outboard seal and J-33162 on inboard seal, if necessary.
Fig. 7 Removing And Installing Axle Shaft Nut
Fig. 1 Front Wheel Drive Components And Axle Shaft Removal
