Bonneville V6-3800 3.8L Supercharged (1992)
Console: All Technical Service Bulletins
Armrest Bin Lid Mounting Plate - Breakage
Group Ref.: Chassis/Body Electrical
Bulletin No.: 438302
Date: April, 1994
SUBJECT:
ARMREST BIN LID MOUNTING PLATE BREAKAGE
(INSTALL NEW MOUNTING PLATE)
MODELS:
1992-94 PONTIAC BONNEVILLE
CONDITION:
Some owners may comment on breakage of the armrest bin lid mounting plate.
CAUSE:
Breakage is due to the armrest bin lid being extended too far while open.
CORRECTION:
ARMREST BIN LID 1992-94 PONTIAC BONNEVILLE
The mounting plate for the armrest bin lid has been redesigned. Do not replace both the bin lid and the bin lid mounting plate. The correct procedure is
to replace the bin lid mounting plate only.
1.
Remove the armrest bin lid. Refer to Section 8C in the Service Manual.
2.
Remove bin lid mounting plate fasteners and mounting plate.
3.
Install new bin lid mounting plate, P/N 25536564 and fasteners.
