Bonneville V6-3800 3.8L Supercharged (1992)
5. Accumulator from vehicle.
INSTALL OR CONNECT
1. Accumulator inlet and outlet connections (hand tight).
2. Retaining clamp screw.
^
Tighten screw to 6 Nm (53 lb. in.).
3. Torque accumulator inlet and outlet connections to specifications.
^
Tighten Accumulator connections to 24 Nm (18 lb. ft.).
4. Electrical connector to pressure cycling switch.
5. Rear engine sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
^
Evacuate, charge, and leak test A/C system.
