Bonneville V6-3800 3.8L Supercharged (1992)
Heater Core: Service and Repair
HEATER CORE REPLACEMENT
Heater Hoses
Tool Required:
J 37097 Mubea Hose Clamp Pliers
REMOVE OR DISCONNECT
1. Drain cooling system. See: Engine, Cooling and Exhaust/Cooling System/Service and Repair
2. Heater hoses from heater core, using J 37097.
3. Retaining screws and A/C temperature valve actuator. See: Air Door/Air Door Actuator / Motor/Service and Repair
4. Retaining screws and heater core cover.
5. Retaining screws and heater core from vehicle.
INSTALL OR CONNECT
1. Heater core into vehicle and attaching screws.
Tighten
Screws to 1.4 Nm (12 lb in).
2. Heater core cover and attaching screws.
Tighten
Screws to 1.4 Nm (12 lb in).
3. Temperature valve actuator and screws.
Tighten
Screws to 1.4 Nm (12 lb in).
4. Heater hoses to heater core using tool J 37097.
5. Fill cooling system.
