pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Electrical - Manual Updates on Various Systems|Page 9908 > < Electrical - Manual Updates on Various Systems
Page 2
background image

Page(s)

Revision

8A-44-2,

The .5 TAN (800) wires at terminal 42 of the Electronic Brake Control Module (EBCM), terminal

8A-47-0,

A8 of the Diagnostic/Energy Reserve Module (DERM), and at terminals C and H of connector 

8A-50-0

C2 of the Remote Accessory (RAC) Control Module is changed to .8 TAN (800).

8A-45-0

The .5 BLK (1387) wire at the TFE Steering Solenoid is changed to .5 DK GRN/WHT (1387).

8A-45-0,

The .8 BLK (1387) wire between terminal B8 of the Multi-Function Chime (MFC) Module and terminal E1 of connector

8A-76-0

C260 is changed to .8 DK GRN/WHT (1387).

8A-64-0

The .8 DK GRN/YEL (762) wire between in-line connector C200 and the A/C High Pressure Cut-Out Switch
is changed to 1 LT GRN (66).

8A-64-0

The .8 DK BLU (204) wire at terminal B of the A/C High Pressure Cut-Out Switch is changed to 1 DK BLU (204).

8A-112-0

The .5 RED (1324) wires to the Tail/Back Up Light Assemblies are changed to .8 LT GRN (24).

8A-115-0

The terminal at in-line connectors C701 and C801 between the Rear Door Courtesy Lights and Splice S211 is
changed to C.

Electrical - Manual Updates on Various Systems|Page 9908 > < Electrical - Manual Updates on Various Systems