Bonneville V6-3800 3.8L Supercharged (1992)
Brake Light Switch: Adjustments
Installing Stoplight Switch
1. Remove I/P sound insulators, as needed for repairs.
2. Disconnect electrical connectors and vacuum hose from stoplight switch, then remove stoplight switch.
3. Fully depress brake pedal, and hold.
4. Connect switch and install as shown in figure. Make all connections before installing. Press switch in until no more audible clicks are heard, and
all retaining tabs are seated in mounting bracket. When pressing switch onto mounting bracket, do not apply over 111 N (25 lb.) of side load
pressure to the two terminal housing connectors.
