Bonneville V6-3800 3.8L Supercharged (1992)
12.
Connect the inflator module to the pigtail adapter on the SIR Deployment Harness. The SIR Deployment Harness shall remain shorted and not be
connected to a power source until the air bag is to be deployed. The inflator module will immediately deploy the air bag when a power source is
connected to it. Refer to Figure 5.
Important:
Ensure that the pigtail adapter is firmly seated into the inflator module connector. Failure to fully seat the connectors may leave the shorting bar
located in the inflator module connector functioning (shorting the deployment circuit) and may result in nondeployment of the inflator module.
13.
Verify that the area around the inflator module is clear of all people and loose or flammable objects.
14.
Verify that the inflator module is firmly and properly secured in J 39401.
15.
Notify all people in the immediate area of your intention to deploy the inflator module. The deployment will be accompanied by a substantial noise
which may startle the uninformed.
