Bonneville V6-3800 3.8L VIN L SFI (1995)
CAUTION: When servicing an Instrument Panel (I/P) assembly containing a live inflator module, or when leaving an I/P assembly
containing a live inflator module unattended on a bench or other surface, always face the air bag deployment opening up, away from the
surface. This is necessary so that a free space is provided to allow the air bag to expand in the unlikely event of accidental deployment.
Failure to follow procedures could result in personal injury.
1. Instrument Panel assembly (I/P).
2. Screw.
3. Electrical Connector.
4. PASS-Key II module from bracket by sliding out.
5. Nut.
6. Bracket.
INSTALL OR CONNECT
1. Bracket.
2. Nut.
TIGHTEN
-
Nut to 9.5 Nm (84 lb. in.).
3. PASS-Key II module by sliding into mounting bracket.
4. Electrical connector.
5. Screw.
TIGHTEN
-
Screw to 1.5 Nm (14 lb. in.).
6. Instrument Panel assembly (I/P).
-
Enable Supplemental Inflatable Restraint (SIR) system.
