Bonneville V6-3800 3.8L VIN L SFI (1995)
Cruise Control Servo: Service and Repair
1. Remove throttle body intake ductwork, then disconnect retainer at servo blade.
2. Disconnect cruise control cable at from servo bracket by release locking tangs.
3. Disconnect vacuum hoses and electrical connector.
4. Remove servo bracket nuts, servo and bracket assembly.
5. Remove bolts retaining servo to bracket, then servo.
6. Reverse procedure to install noting the following:
a. Torque servo to bracket bolts to 14 ft. lbs.
b. Torque servo bracket nuts to 0.0 ft. lbs.
c. Retainer must be installed with tang secured over cable stud head.
