Bonneville V6-3800 3.8L VIN L SFI (1995)
2.
Crankshaft balancer bolt.
3.
Crankshaft balancer using J 38197-A and J 38197-MOD (Figure 3).
a.
Invert J 38197-2 so that the leg of the tool is facing away from the crankshaft balancer.
b.
Install the silver screws (J 38197-4) to crankshaft balancer.
c.
Turn J 38197-1 to remove crankshaft balancer from crankshaft.
d.
Remove J 38197-1, 2 and 4 from crankshaft balancer.
Important:
The crankshaft balancer is serviced as an assembly. Do not attempt to separate pulley from balancer hub.
Install or Connect
1.
Lubricate crankshaft and inside of balancer with clean engine oil.
2.
Crankshaft balancer using the small hole to aid in the alignment of crankshaft key.
3.
Crankshaft balancer bolt.
^
Hold flywheel using J 37096.
Tighten
^
Tighten bolt to 150 N-m (111 lb ft) + 76° using J 36660.
