Bonneville V6-3800 3.8L VIN L SFI (1995)
1. A/C temperature valve actuator and securing screws.
-
Tighten screws to 1.4 Nm (12 lb. in.).
2. Electrical connector to A/C temperature valve actuator.
Note: Adjust valve link rod before connecting to temperature valve.
Temperature Valve Link Adjustment
-
Start vehicle; set fan to IIII (HIGH) and temperature to full hot.
-
Allow 45 seconds minimum for A/C temperature valve actuator to move to full hot position. Move temperature valve to full hot position and
snap temperature valve link rod into temperature valve.
3. Temperature valve link rod to temperature valve (snap in).
4. I/P compartment insert.
5. Right sound insulator.
-
Enable SIR system, Refer to Air Bags and Seat Belts. See: Restraint Systems
Actuator (Air Mix Valve)
Programmer Assembly And Temperature Valve Link
REMOVE OR DISCONNECT
-
Disable Supplemental Inflatable Restraint (SIR) system, Refer to Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems). See:
Restraint Systems/Air Bag Systems
1. Instrument Panel (I/P) assembly.
2. Temperature valve link rod.
3. Electrical connector.
4. Air mix actuator screws and actuator.
INSTALL OR CONNECT