Bonneville V6-3800 3.8L VIN L SFI (1995)
Lamp Control Module: All Technical Service Bulletins
Lamp Control Module - Service Procedure Revised
File In Section: 9 - Accessories
Bulletin No.: 43-90-19
Date: October, 1994
SERVICE MANUAL UPDATE
Subject:
Section 9C - Revised Lamp Control Module Service Procedure and Artwork
Models:
1995 Buick Park Avenue, LeSabre
1995 Oldsmobile Ninety Eight, Eighty Eight
1995 Pontiac Bonneville
Please replace "Twilight Sentinel: On Vehicle Service" "Lamp Control Module" and "Figure 4 - Lamp Control Module" found in the appropriate Service
Manual with the following procedure and figure.
Lamp Control Module
Remove or Disconnect
1.
Right sound insulator (Oldsmobile and Buick), left sound insulator (Pontiac).
2.
Push in locking tab and slide lamp control module to the left.
3.
Module from bracket.
^ It may be necessary to pull back the HVAC duct to have enough clearance to remove lamp control module.
4.
Disconnect 2 electrical connectors.
Install or Connect
1.
Two electrical connectors to module.
2.
Lamp control module to bracket.
^ It may be necessary to pull back the HVAC duct to install module.
3.
Sound insulator.
