pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3664 > < Diagram Information and Instructions|Page 3662
Page 6
background image

32 Pin C-D Connector (WHITE)

Powertrain Control Module (PCM) Connector (White C-D)

PCM Connector E-F (Blue)

POWERTRAIN CONTROL MODULE (PCM) VOLTAGE CHART

This PCM voltage chart is for use with a digital voltmeter to further aid in diagnosis. The voltages you get may vary due to low battery charge or
other reasons, but they should be very close. The B+ symbol indicates a nominal system voltage of 12-14 volts.

CONDITIONS FOR TESTING

^

Engine at operating temperature (upper radiator hose hot).

^

Engine idling in "Closed Loop" (for "Engine Run" column) in park or neutral.

^

Test terminal not grounded.

^

Scan tool not installed.

^

Accessories "OFF."

NOTE:  Before checking voltages, be sure PCM and engine grounds are clean and tight.

CHART LEGEND

*

Less than 0.5 volts.

** If equipped.

***Foot off brake.

(1) B+ for 1st 2 seconds.

Diagram Information and Instructions|Page 3664 > < Diagram Information and Instructions|Page 3662