Bonneville V6-3800 3.8L VIN L SFI (1995)
Fuel Filler Cap: Description and Operation
DESCRIPTION
The fuel tank filler neck is equipped with a screw type cap. The threaded part of the cap requires several turns counterclockwise to remove. The
long threaded area was designed to allow any remaining fuel tank pressure to escape while the cap was being removed. A built in torque limiting
device prevents overtightening. To install, turn the cap clockwise until a clicking noise is heard. This signals that the correct torque has been
reached and the cap is fully seated.
NOTICE: If the fuel filler cap requires replacement, use only a cap with the same features. Failure to use the correct cap can result in a serious
malfunction of the system.
