Bonneville V6-3800 3.8L VIN L SFI (1995)
Alignment: Service and Repair
Rear Wheel Alignment
Notes
When checking rear wheel alignment, the electronic leveling system must have the superlift struts inflated with residual pressure only. Place a
weight in trunk and turn ignition on and move transmission selector from Park to Reverse position and back. This will activate the compressor.
Turn ignition off and remove weight from trunk. Wait 30 seconds for the system to exhaust. Roll vehicle forward one complete wheel rotation.
Jounce vehicle before checking alignment.
Rear Camber Adjustment
Fig. 5 Rear Camber & Toe Adjustments
1. Loosen strut to knuckle attaching nuts.
2. Install camber adjusting tool J-29862, Fig.5.
3. Move strut to set camber to specifications.
4. Remove camber adjusting tool and torque strut to knuckle nuts to 144 ft. lbs.
5. Recheck camber setting.
Rear Toe Adjustment
