Bonneville V6-3800 3.8L VIN L SFI (1995)
For "lead or pull" conditions to the left:
^
Rotate upper spring seat counter clockwise 20 to 25 degrees, or about 2.5 cm (1 in.). See Figure 2.
Important:
Do not exceed the 25 degrees, or about 2.5 cm (1 in.) when rotating the upper seat spring.
8.
Turn the Strut Compressor Tool Forcing Screw (see Figure 1, Item 3) to remove the pressure on the strut spring.
9.
Remove strut from the Strut Compressor Tool, J 34013-B.
10.
Install the strut assemblies on vehicle. Refer to the Strut Replacement Installation Procedure in the Front Suspension section of the Service
Manual.
11.
Road test vehicle for a sufficient distance on a known smooth road surface to duplicate the condition.
Important:
It may be necessary to reset the alignment back to specifications.
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation
Description
Labor Time
E3027
Springs, Front Coil
1.7 hrs
Both - Replace
