Bonneville V6-3800 3.8L VIN L SFI (1995)
Flex Plate: Technical Service Bulletins
Flywheel Fastener Tightening Specification - Revised
File in Section: 6 - Engine
Bulletin No.: 53-61-01
Date: May 1995
SERVICE MANUAL UPDATE
Subject:
Section 6A - Revised Flywheel Fastener Tightening Specification
Models:
1995 Buick LeSabre, Park Avenue
1995 Oldsmobile Eighty Eight, Ninety Eight
1995 Pontiac Bonneville
with 3800 Engine, (VINs L, K, I - RPOs L27, L36, L67)
This bulletin revises the following pages in Section 6A of the Service Manual:
Page Number
Heading
6A7-33
Flywheel
6A7-34
Rear Main Seal
6A8-40
Flywheel
6A8-41
Rear Main Seal - Engine Code 1
6A8-42
Rear Main Seal Carrier - Engine Code K
These pages list an incorrect fastener tightening specification for the flywheel bolts.
The correct fastener tightening specification is 15 Nm + 50° (11 lb.ft. + 50°).
Please add this information to the 1995 Service Manual.