Bonneville V6-3800 3.8L VIN L SFI (1995)
2. Switch plate.
3. Courtesy 1amp.
4. Lock rod knob by unsnapping at forward end.
5. Inside handle cup at notch from handle bezel.
6. Attaching screw and inside handle bezel from rear edge.
7. Armrest applique at clip by unsnapping with small flat-bladed tool.
8. Electrical connectors.
9. Loosen setscrew detaching mirror control to applique (electric mirror control may be removed with applique without loosening setscrew).
10. Screws mounted through holes in panel front.
11. Screws through courtesy lamp opening.
12. Screw at top of anmrest handle.
13. Using J 38778 release retainers and remove trim panel.
14. Speaker connectors.
15. Decklid release connector (if applicable).
NOTE To separate belt strip from belt retainer, insert tool J 38778 between belt strip and belt retainer at rearward edge and gently pry apart.
16. Speaker(s).
17. Water deflector by peeling deflector off door inner panel.
