Bonneville V8-350 5.7L DSL (1984)
FIGURE 2 - NEW INPUT HOUSING & SHAFT ASSEMBLY
The new input housing and shaft assembly has a check valve retainer and ball assembly which is pressed into the housing (see Figure 2).
Service Information:
1.
Only the new input housing and shaft assembly is available for service. The check valve retainer and assembly will be available at a later date.
Refer to the parts manual for correct part numbers and model applications.
2.
The check valve retainer and ball assembly must not be installed in the past input housing and shaft assembly. Damage to the piston or housing lip
seal surface could result.