Bonneville V8-4.6L VIN Y (2004)
10. Disconnect the coaxial cable from the antenna module located on the rear roof beam.
11. Disconnect the power lead connection (2).
12. Remove the rosebud and the edge of metal clips (3) from the roof beams.
13. Remove the coaxial cable harness from the vehicle.
INSTALLATION PROCEDURE
1. Install the coaxial cable harness to the roof beams with the rosebud and the edge of metal clips (3). The yellow taped rosebud clip indicates the
first rosebud clip to set.
2. Connect the power lead connector (2).
