Bonneville V8-4.6L VIN Y (2004)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Fascia Replacement
Front Bumper Fascia Replacement
Tools Required
J 36346 Fascia Retainer Remover
Removal Procedure
1. Open the hood.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Use the J 36346 in order to remove the push pin retainers (2) that retain the front bumper fascia (1) to the front wheelhouse extensions (3).
4. Disconnect the electrical connectors at the fog lamps.
5. Loosen the captive stud and nut (1).
6. Tap the captive stud and nut (1) up to clear the keyhole slots in the fenders.
7. Loosen the bolt (2) enough to clear the weld nut on the fenders.
8. Use the J 36346 in order to remove the push pin retainers (4) securing the front bumper fascia to the upper support panel.