Bonneville V8-4.6L VIN Y (2004)
11. Mark the position of the hinge half (2) on the body.
12. Mark the position of the hinge half on the door.
13. Remove the hinge fasteners (1) from the pillar.
14. Remove the hinge half from the pillar.
Important: Be careful to secure the studplate within the door, when removing the hinge half from the door. The studplate is not attached
to the door and could fall into the door.
15. Remove the hinge fasteners from the door.
16. Remove the hinge half from the door.
Installation Procedure
1. Align the hinge half (2) to the body.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the hinge to body fasteners.
Tighten the fasteners to 35 N.m (26 lb ft).
3. Align the door half of the hinge with the marks made on the door during removal.
4. Install the hinge to the door fasteners (1).
Tighten the hinge to door fasteners (1) to 34 N.m (24 lb ft).
5. Align the door hinge halves.
6. Lower the door so the hinge halves mate together.
