pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Bezel Replacement|Page 8958 > < Bezel Replacement|Page 8956
Page 1
background image

Front Door Panel: Service and Repair
Panel Replacement

Front Side Door Trim Panel Replacement

Tools Required

*

J 36796 Clip Zip Tool

*

J 38778 Door Trim Pad Clip Remover

Removal Procedure

1. Remove the inside door handle bezel.

2. Remove the upper door trim panel.

1. Use the J 38778 in order to release the retainer at the top of the upper door trim panel.
2. Lift the upper door trim panel upwards in order to remove.
3. Disconnect the wire harness to the tweeter.

3. Use the J 36796 in order to release the retainers around the outside edges of the door trim panel. Start at the bottom and work around.

4. Starting at the bottom rear of the door trim panel pull inwards, while lifting upwards in order to remove.
5. Disconnect the door trim panel wiring harness.

6. Remove the armrest pull cup retainers from the inside of the door trim panel.

Bezel Replacement|Page 8958 > < Bezel Replacement|Page 8956