Bonneville V8-4.6L VIN Y (2004)
Front Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Front Side Door Window Rear Channel Replacement
Removal Procedure
1. Lower the door window to the full down position.
2. Remove the door trim panel.
3. Remove the rearward half of the water deflector.
4. Remove the window inner belt seal.
5. Pull the lower rear portion of the window seal out of the door frame far enough to gain access to the lower fastener of the door frame applique.
6. Remove the upper run channel fastener (1), which is also the lower door applique fastener.
7. Reinstall the window weatherstrip into the door frame.
8. Connect the door trim panel wire connector.
9. Run the window up until there is a one inch opening at the top.
10. Remove the lower run channel fastener (2).
11. Pull the run channel down to clear the window.
12. Remove the run channel.
Installation Procedure
1. Insert the run channel into the door through the front access hole.