Bonneville V8-4.6L VIN Y (2004)
1. Install the rods to the inside door handle in the following sequence:
1. Handle lever rod (2).
2. Lock knob rod (1).
2. Guide the tabs (4) on the inside door handle into the slots in the door.
3. Slide the inside door handle rearward to engage tabs.
4. Snap the latch and lock rods into the guide clip.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the inside door handle fastener (2).
Tighten the fastener to 2 N.m (18 lb in).
6. Install the water deflector.
7. Install the door module.
8. Install the door trim panel.
