Bonneville V8-4.6L VIN Y (2004)
Hood Latch Release Cable: Service and Repair
Hood Primary Latch Release Cable Replacement
Removal Procedure
1. Open the hood.
2. Remove the hood latch.
Disconnect the hood release cable (3) from the hood latch (2).
3. Tie a piece of string around the hood release cable. This will ease the installation of the hood release cable through the engine compartment.
4. Remove the front fascia extension.
5. Remove the front wheelhouse liner.
6. Open the clips (3) retaining the hood release cable (2) to the vehicle.
7. Remove the screws (2) retaining the hood release handle (1) to the vehicle.
8. Disconnect the hood release cable from the hood release handle (1).
9. Tie a piece of string around the hood release cable. This will ease the installation of the hood release cable through the passenger compartment.
