Bonneville V8-4.6L VIN Y (2004)
Trunk / Liftgate Striker: Service and Repair
Rear Compartment Lid Latch Striker Replacement
Removal Procedure
1. Remove the rear compartment sill plate.
2. Remove the rear facia.
3. Remove the nuts retaining latch striker from outside the rear compartment.
4. Remove the rear compartment latch striker.
Installation Procedure
1. Install the rear compartment latch striker.
2. Install the nuts in order retain the latch striker.
Notice: Refer to Fastener Notice in Service Precautions.
3. Adjust the rear compartment latch striker as necessary.
Tighten the latch striker nuts to 9 N.m (80 lb in).
4. Install the rear facia.
5. Install the rear compartment sill plate.