pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 9215 > < SIR Disabling and Enabling Zones|Page 9213
Page 6
background image

4. Remove the rear seat.
5. Locate the rear fuse center under rear seat, then remove the fuse center top cover.

IMPORTANT:  With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.

6. Locate and remove the SIR fuse from the rear fuse center.

7. Remove the left insulator panel.
8. Remove the Connector Position Assurance (CPA) (1) from the steering wheel module coil yellow connector (4) located near the steering column.
9. Disconnect the steering wheel module coil yellow connector (4) from the vehicle yellow harness connector (3).

ENABLING PROCEDURE

1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil yellow connector (4) to the vehicle yellow harness connector (3).

SIR Disabling and Enabling Zones|Page 9215 > < SIR Disabling and Enabling Zones|Page 9213