Bonneville V8-4.6L VIN Y (2004)
2. Secure the seat adjuster motor to the seat adjuster motor plate.
1. Install the motor insert (2) into the motor grommet (3) of the new motor.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolt (1) to secure the motor to the motor plate (4).
Tighten the bolt (1) to 4 N.m (36 lb in).
3. Connect the electrical connector.
4. Install the seat adjuster drive cables.
5. Install the seat cushion.
6. Install the seat into the vehicle.
7. Enable the SIR system.
8. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration.
